Mercedes Sprinter Radiator Coolant Hose – Genuine OEM | VS30 W907/W910 | #907501650064 (2019+)

A cracked or leaking radiator hose on a VS30 Sprinter will drain your cooling system and push the engine toward overheating — often with little warning until the temperature gauge is already climbing. This is the Genuine Mercedes-Benz OEM radiator coolant hose for VS30 Sprinters, a direct replacement that restores sealed, pressurized coolant flow between the engine and radiator.

What This Part Does

The radiator coolant hose carries coolant between the engine and the radiator, completing the primary cooling circuit. As the engine reaches operating temperature, hot coolant flows out to the radiator where it is cooled by airflow through the fins, then returned to the engine to absorb heat again. The hose must maintain a pressurized, sealed connection through repeated thermal cycling — expanding and contracting with temperature changes across hundreds of thousands of cycles over its service life. When the hose develops cracks, softens, hardens, or loses its seal at the connection points, coolant escapes, system pressure drops, and the engine loses the cooling capacity it depends on under load.

Common Symptoms of a Failing Radiator Coolant Hose

• Visible coolant leak or dried coolant residue at the hose ends or along the hose body
• Low coolant warning or repeated need to top off the reservoir
• Engine temperature rising above normal, particularly under load or in slow traffic
• Sweet coolant smell from the engine bay during or after driving
• Soft spots, bulging, cracking, or surface checking visible on the hose

When to Replace

Replace when the hose shows any cracking, hardening, softening, or weeping at the connection points. Also replace as preventive maintenance at high mileage — rubber hoses degrade from the inside out and may show no external damage while already compromised internally. Inspect and replace hose clamps at the same time.

VS30 Specific — VIN Verification Required

This hose fits VS30 Sprinters (W907/W910). It is not compatible with NCV3 (2007–2018) or T1N (2001–2006) Sprinters. Radiator hose routing and connection points vary by engine configuration and wheelbase — always verify by VIN before ordering. Contact us and we'll confirm fitment before you buy.

Fitment

• 2019+ Mercedes-Benz Sprinter 1500 – VS30 (W907/W910)
• 2019+ Mercedes-Benz Sprinter 2500 – VS30 (W907/W910)
• 2019+ Mercedes-Benz Sprinter 3500 – VS30 (W907/W910)
• 2019+ Mercedes-Benz Sprinter 3500XD – VS30 (W907/W910)

Part Numbers

• Mercedes OEM: 9075016500 / A9075016500 / 907-501-65-00
• Manufacturer: Genuine Mercedes-Benz
• SKU: 907501650064OE