Mercedes Sprinter Front Engine Mount – Hutchinson | NCV3 OM642 | #9062411713 (2010–2018)

A worn engine mount on a NCV3 Sprinter allows the engine to move beyond its designed range of motion under load — producing a thud on acceleration, vibration through the steering wheel and floor at idle, and progressive stress on the exhaust manifold, coolant hoses, and wiring harness that eventually causes secondary failures. This is the Hutchinson front engine mount for NCV3 Sprinters equipped with the 3.0L OM642 diesel engine, sold individually and fitting both the left and right front mount positions, a direct replacement that restores proper engine support and vibration isolation.

What This Part Does

The engine mount is a rubber-bonded bracket that connects the engine to the chassis at the front mount positions — one on the left side and one on the right side of the engine. Together, the front mounts and rear transmission mount form the three-point mounting system that holds the entire powertrain in its correct position within the engine bay. The rubber element within each mount absorbs the cyclic torque pulses generated by combustion, the vibrations transmitted through the drivetrain under load, and the inertial forces during acceleration and braking. When the rubber degrades, cracks, or the mount collapses, the engine begins to move excessively on its mounts — transmitting vibration directly into the body and applying unintended mechanical loads to every flexible connection attached to the engine.

Common Symptoms of a Failing Engine Mount

• Thudding or clunking felt through the floor or steering wheel when pulling away from a stop
• Excessive vibration at idle that worsens when the engine is put in gear
• Engine movement visible in the engine bay when revved — beyond normal idle movement
• Vibration that increases under load and diminishes at highway speed
• Visible rubber cracking, separation, or collapse on the mount body during inspection

When to Replace

Replace when the mount shows visible rubber deterioration or collapse, or when engine movement and vibration are confirmed to the mount location. Mounts typically wear in pairs — always inspect both front mounts when one is found failed, and replace both together for balanced engine support. Replace the rear transmission mount (6392420013) at the same time if it is also showing wear.

NCV3 OM642 Specific — VIN Verification Required

This front engine mount is for NCV3 Sprinters equipped with the 3.0L OM642 diesel engine. Always verify your engine code and VIN before ordering. Contact us and we'll confirm fitment before you buy.

Fitment

• 2010–2018 Mercedes-Benz Sprinter 2500 – 3.0L OM642, front left or right (NCV3/W906)
• 2010–2018 Mercedes-Benz Sprinter 3500 – 3.0L OM642, front left or right (NCV3/W906)
• 2010–2018 Mercedes-Benz Sprinter 3500XD – 3.0L OM642, front left or right (NCV3/W906)
• 2010–2018 Freightliner Sprinter 2500 / 3500 – 3.0L OM642 (NCV3)

✔ Sold individually — 2 required for a complete front mount replacement (left and right)
✔ Fits both left and right front mount positions
✔ Always inspect and replace both front mounts together

Part Numbers

• Mercedes OEM: 9062411713 / A9062411713 / 906-241-17-13
• Manufacturer: Hutchinson — 538B47
• SKU: 9062411713HUT