Mercedes Sprinter Rear Crankshaft Seal Cover – Elring | NCV3 3.0L OM642 | #6420100214 (2007–2018)
A leaking or damaged rear crankshaft seal cover on a Sprinter OM642 allows engine oil to escape at the rear of the engine — contaminating the flywheel, clutch, and bellhousing and creating an oil leak that gets worse with every heat cycle until the cover is replaced. This is the Elring rear crankshaft seal cover for NCV3 Sprinters equipped with the 3.0L OM642 V6 diesel engine — a different design from the 6420100314 — a direct replacement that restores the sealed rear crank exit.
What This Part Does
The rear crankshaft seal cover mounts to the rear face of the engine block and provides the precision bore and mounting surface the rear main radial shaft seal requires to maintain contact with the rotating crankshaft snout. The cover must maintain dimensional accuracy at the seal bore to ensure the seal lip contacts the crankshaft uniformly around its circumference — any warping, cracking, or bore damage causes the seal to leak despite otherwise being in good condition. When this cover develops damage, corrosion at the sealing flange, or physical cracking, the seal cannot maintain its designed contact geometry and oil escapes along the crankshaft toward the transmission.
Common Symptoms of a Failing Rear Crankshaft Seal Cover
- Oil accumulation at the rear of the engine or on the transmission bellhousing
- Oil residue on the flywheel or flex disc found during drivetrain service
- Oil drops under the van centered behind the engine
- Repeated rear main seal leaks after seal-only replacement — indicating the cover bore is damaged
When to Replace
Replace when the cover bore is damaged, corroded, or warped beyond sealing — situations where replacing only the seal will not resolve the leak. Also replace whenever the transmission is removed and the cover shows age-related deterioration. Always install a new rear main seal when the cover is replaced.
NCV3 OM642 Specific — VIN Verification Required
This rear crankshaft seal cover is for NCV3 Sprinters equipped with the 3.0L OM642 V6 diesel engine. It is a different part from 6420100314 — always verify your existing part number and VIN before ordering. Contact us and we'll confirm fitment before you buy.
Fitment
- 2007–2018 Mercedes-Benz Sprinter 2500 / 3500 – 3.0L OM642 (NCV3/W906)
- 2007–2009 Dodge Sprinter 2500 / 3500 – 3.0L OM642 (NCV3)
- 2007–2018 Freightliner Sprinter 2500 / 3500 – 3.0L OM642 (NCV3)
✔ Always install a new rear main seal when replacing this cover
✔ Verify against your existing part number — different design from #6420100314
Part Numbers
- Mercedes OEM: 6420100214 / A6420100214 / 642-010-02-14
- Manufacturer: Elring — 686.870
- SKU: 6420100214