Mercedes Sprinter Left Front Brake Caliper – Hudson | NCV3 2500 | #0044205783 (2007–2018)

A seized or leaking left front brake caliper on a Sprinter 2500 creates an immediate safety hazard — dragging brakes on the front axle generate dangerous heat, cause the van to pull hard to the left under braking, and destroy pads and rotors on the affected corner in a fraction of their normal service life. This is the Hudson left front brake caliper for NCV3 Sprinter 2500 models, a direct replacement that restores proper front brake clamping force, release, and balanced braking across the front axle.

What This Part Does

The front brake caliper is a hydraulic clamping assembly that mounts to the existing bracket on the steering knuckle and straddles the front brake rotor. When the brake pedal is pressed, hydraulic pressure pushes the caliper's twin pistons outward, clamping the brake pads against both faces of the rotor and generating the friction that slows the van. The front axle handles the majority of braking effort — typically 60–70% of total stopping force — making front caliper condition the most direct factor in overall braking performance. When the caliper's piston seals fail, its slider pins seize, or the piston sticks in the applied position, braking becomes uneven, the van pulls under braking, and the left front corner begins destroying pads and rotors at an accelerated rate.

Common Symptoms of a Failing Front Brake Caliper

• Vehicle pulling strongly to the left during braking
• Left front brake pads wearing significantly faster than the right
• Heat, burning smell, or smoke from the left front wheel after driving
• Brake pedal that feels spongy or requires more travel than normal
• Brake fluid leaking from around the caliper body or at the brake hose connection
• Grinding or squealing from the left front corner

When to Replace

Replace when the caliper is confirmed seized, leaking, or unable to retract properly after brake service. Always replace front calipers in pairs — left and right — to maintain even braking balance. Replace brake pads and inspect rotors at the same time, and bleed the brake system after installation. If the existing bracket shows corrosion or damage, use the bracket assembly version (SKU: 0044205783HP) for a complete replacement.

NCV3 2500 Specific — VIN Verification Required

This is the front left caliper for NCV3 Sprinter 2500 models (W906) — caliper only, without bracket. It is not compatible with NCV3 Sprinter 3500 front calipers or VS30 Sprinters. Always verify by VIN before ordering. Contact us and we'll confirm fitment before you buy.

Fitment

• 2007–2009 Dodge Sprinter 2500 – Front Left (NCV3/W906)
• 2007–2018 Freightliner Sprinter 2500 – Front Left (NCV3/W906)
• 2010–2018 Mercedes-Benz Sprinter 2500 – Front Left (NCV3/W906)

✔ Left (driver) side only — right side requires #0044205883
✔ Caliper only — bracket not included (see SKU 0044205783HP for caliper + bracket)
✔ NCV3 2500 only — not compatible with 3500 front calipers
✔ Replace in pairs with right front caliper for even braking balance

Part Numbers

• Mercedes OEM: 0044205783 / A0044205783 / 004-420-57-83
• Cross-reference: 68006723AA
• Manufacturer: Hudson
• SKU: 0044205783H