Mercedes Sprinter HVAC Blower Motor Assembly – Genuine OEM | VS30 | #0008307902 (2019–2025)
A failing HVAC blower motor on a VS30 Sprinter leaves the cabin without airflow — no heat in winter, no A/C in summer, and no defrost when you need it most. This is the Genuine Mercedes-Benz OEM front HVAC blower motor assembly for VS30 Sprinters, a complete replacement that includes the motor and impeller and restores full cabin airflow across all fan speeds and climate control modes.
What This Part Does
The HVAC blower motor is the electric motor that drives the squirrel cage impeller inside the HVAC housing, drawing air through the cabin filter, across the heater core and evaporator, and pushing it into the cabin through whichever vents the climate control system has selected. On the VS30, the blower motor is controlled by the HVAC module through a blower motor regulator that varies fan speed continuously from low to maximum. The assembly is mounted in the front HVAC housing under the dashboard and is the sole source of airflow for heating, cooling, ventilation, and defrost on the primary climate system. When the motor's brushes wear, its bearings fail, or the impeller cracks or becomes unbalanced, airflow drops, becomes noisy, or stops entirely — leaving the cabin without climate control at any speed setting.
Common Symptoms of a Failing Blower Motor
- No airflow from any vent position at any fan speed setting
- Airflow that works at some fan speeds but not others — often high only, indicating a failing regulator rather than the motor itself
- Grinding, rattling, or squealing from behind the dashboard when the blower is running
- Burning smell from the HVAC system when the fan is switched on
- Blower that runs at one speed regardless of the control setting
When to Replace
Replace when the motor is confirmed failed — no airflow at any speed with a known-good regulator — or when noise from the blower housing indicates bearing or impeller damage. Always inspect and replace the blower motor regulator at the same time, as regulator failure that causes the motor to run at maximum voltage can overheat and shorten motor life. The cabin air filter should also be replaced during blower motor service.
VS30 Specific — VIN Verification Required
This blower motor assembly fits VS30 Sprinters across all engine configurations — 2.0L OM654, 2.1L OM651, and 3.0L OM642 — left-hand drive, front HVAC position. It does not fit NCV3 Sprinters (2007–2018). Always verify by VIN before ordering. Contact us and we'll confirm fitment before you buy.
Fitment
- 2019–2025 Mercedes-Benz Sprinter 1500 – Front HVAC, all engines (VS30)
- 2019–2025 Mercedes-Benz Sprinter 2500 – Front HVAC, all engines (VS30)
- 2019–2025 Mercedes-Benz Sprinter 3500 – Front HVAC, all engines (VS30)
- 2019–2025 Mercedes-Benz Sprinter 3500XD – Front HVAC, all engines (VS30)
- 2019–2023 Mercedes-Benz Sprinter 4500 – Front HVAC, all engines (VS30)
✔ Front HVAC position — left-hand drive only ✔ Includes impeller/fan wheel — complete assembly ✔ Does NOT fit NCV3 Sprinters (2007–2018)
Part Numbers
- Mercedes OEM: 0008307902 / A0008307902 / 000-830-79-02
- Manufacturer: Genuine Mercedes-Benz
- SKU: 0008307902OE